The main purpose
This machine is suitable for the concentration, mixing, drying of powdery, granular and fibrous materials in chemical, pharmaceutical, food and other industries, as well as materials that require low-humidity drying (such as biochemical products, etc.). It is more suitable for materials that are easily oxidized, volatile, and strongly stimulated by heat sensitivity. , Toxic materials and materials that are not allowed to destroy crystals are dried.
Detail image
Features
1. When the oil is heated, automatic constant temperature control is adopted, which can dry biochemical products and mineral raw materials. The temperature can be between 20-160°C, and the temperature can be within ±2°C.
2. The thermal efficiency is high, more than 2 times higher than that of ordinary ovens.
3. Indirect heating, the material will not be contaminated and meets the requirements of 'GMP'.The equipment maintenance operation is simple and easy to clean.
working principle
In the sealed interlayer, heat is transferred to the material to be dried through the inner shell through thermal energy (such as hot water, low-pressure steam or thermal oil).Driven by power, the tank rotates slowly, and the materials in the tank are continuously mixed, thereby achieving the purpose of enhanced drying.The material is in a vacuum state, and the drop in vapor pressure causes the water (solvent) on the surface of the material to reach a saturated state and evaporate, and is promptly discharged and recycled by the vacuum pump.The water (solvent) inside the material continuously penetrates, evaporates and is discharged to the surface. The three processes are continuously carried out, and the material achieves drying purpose in a short time.
Working principle diagram
Simple structure diagram
Installation diagram
Technical Parameters
型 号 | Model 100 | Model 350 | Model 500 | Model 800 | Model 1000 | Model 1500 | Model 2000 | Model 3000 | Model 4000 |
Tank volume (L) | 100 | 350 | 500 | 800 | 1000 | 1500 | 2000 | 3000 | 4000 |
Charging volume (L) | ≤50 | ≤175 | ≤250 | ≤400 | ≤500 | ≤750 | ≤1000 | ≤1500 | ≤2000 |
Speed (r/min) | 6 | 6 | 6 | 6 | 6 | 6 | 5 | 4 | 4 |
Motor power (kw) | 1.1 | 1.5 | 2.2 | 2.2 | 3 | 4 | 5.5 | 7.5 | 11 |
Floor area (mm) (long x width) | 2160 x 800 | 2260 x 800 | 2350 x 800 | 2560 x 1000 | 2860 x 1300 | 3060 x 1300 | 3260 x 1400 | 3760 x 1800 | 3960 x 2000 |
Rotation height (mm) | 1750 | 2100 | 2250 | 2490 | 2800 | 2940 | 2990 | 3490 | 4100 |
Design pressure inside the tank (Mpa) | -0.09~-0.096 | ||||||||
Jacket design pressure (Mpa) | ≤0.3 | ||||||||
Operating temperature (°C) | Inside the tank ≤85 | Jacket≤140 | |||||||
heating medium | Steam, hot water, thermal oil | ||||||||
Weight (kg) | 825 | 1350 | 1650 | 1800 | 2100 | 2300 | 3000 | 4500 | 5400 |
Note: The heating device vacuum pump is optional.
The main purpose
This machine is suitable for the concentration, mixing, drying of powdery, granular and fibrous materials in chemical, pharmaceutical, food and other industries, as well as materials that require low-humidity drying (such as biochemical products, etc.). It is more suitable for materials that are easily oxidized, volatile, and strongly stimulated by heat sensitivity. , Toxic materials and materials that are not allowed to destroy crystals are dried.
Detail image
Features
1. When the oil is heated, automatic constant temperature control is adopted, which can dry biochemical products and mineral raw materials. The temperature can be between 20-160°C, and the temperature can be within ±2°C.
2. The thermal efficiency is high, more than 2 times higher than that of ordinary ovens.
3. Indirect heating, the material will not be contaminated and meets the requirements of 'GMP'.The equipment maintenance operation is simple and easy to clean.
working principle
In the sealed interlayer, heat is transferred to the material to be dried through the inner shell through thermal energy (such as hot water, low-pressure steam or thermal oil).Driven by power, the tank rotates slowly, and the materials in the tank are continuously mixed, thereby achieving the purpose of enhanced drying.The material is in a vacuum state, and the drop in vapor pressure causes the water (solvent) on the surface of the material to reach a saturated state and evaporate, and is promptly discharged and recycled by the vacuum pump.The water (solvent) inside the material continuously penetrates, evaporates and is discharged to the surface. The three processes are continuously carried out, and the material achieves drying purpose in a short time.
Working principle diagram
Simple structure diagram
Installation diagram
Technical Parameters
型 号 | Model 100 | Model 350 | Model 500 | Model 800 | Model 1000 | Model 1500 | Model 2000 | Model 3000 | Model 4000 |
Tank volume (L) | 100 | 350 | 500 | 800 | 1000 | 1500 | 2000 | 3000 | 4000 |
Charging volume (L) | ≤50 | ≤175 | ≤250 | ≤400 | ≤500 | ≤750 | ≤1000 | ≤1500 | ≤2000 |
Speed (r/min) | 6 | 6 | 6 | 6 | 6 | 6 | 5 | 4 | 4 |
Motor power (kw) | 1.1 | 1.5 | 2.2 | 2.2 | 3 | 4 | 5.5 | 7.5 | 11 |
Floor area (mm) (long x width) | 2160 x 800 | 2260 x 800 | 2350 x 800 | 2560 x 1000 | 2860 x 1300 | 3060 x 1300 | 3260 x 1400 | 3760 x 1800 | 3960 x 2000 |
Rotation height (mm) | 1750 | 2100 | 2250 | 2490 | 2800 | 2940 | 2990 | 3490 | 4100 |
Design pressure inside the tank (Mpa) | -0.09~-0.096 | ||||||||
Jacket design pressure (Mpa) | ≤0.3 | ||||||||
Operating temperature (°C) | Inside the tank ≤85 | Jacket≤140 | |||||||
heating medium | Steam, hot water, thermal oil | ||||||||
Weight (kg) | 825 | 1350 | 1650 | 1800 | 2100 | 2300 | 3000 | 4500 | 5400 |
Note: The heating device vacuum pump is optional.