 |
| Quantity: | |
|---|---|
The main purpose
This machine is a special drying equipment suitable for drying emulsions, suspensions, pastes, solutions and other liquids.In polymers and resins; dyeing
Materials and pigments; ceramics and glass; rust removers and insecticides; carbohydrates and dairy products; detergents and surface active products; fertilizers; drying of organic compounds and inorganic compound liquid materials. outstanding.
Detail image
Features
1. The drying speed is fast, usually only 5-15 seconds, and has the characteristics of instant drying.
2. The whole drying process of materials can be completed in a short time. It is suitable for drying heat-sensitive materials and can maintain the color, aroma and taste of materials.
3. The production process is simplified, operation and control are convenient, and it is suitable for continuous control of production.
4. The product has good dispersion, fluidity and solubility.
working principle
The air passes through the filter and heater and enters the air distributor at the top of the dryer. The hot air enters the dryer evenly in a spiral shape.The material liquid is pumped from the material liquid tank through the filter to the centrifugal atomizer at the top of the dryer, so that the material liquid is sprayed into very small mist-like droplets. The material liquid and the hot air flow together and contact the water to evaporate quickly, and in a very short time The finished product is dried within a certain period of time.The finished product is discharged from the bottom of the drying tower and the cyclone separator, and the waste gas is extracted by the fan and discharged.
Working principle diagram
Process flow diagram
water evaporation curve
Technical Parameters
型 号 | Type 5 | Type 25 | Model 50 | Model 150 | Model 200-2000 |
inlet temperature | 140-350 automatic control | ||||
output temperature | 80-90 | ||||
water evaporation | 5 | 25 | 50 | 150 | 200-2000 |
Centrifugal spray head transmission form | Compressed air transmission | Mechanical transmission | |||
Rotating speed | 25000 | 18000 | 18000 | 16000 | 8000-15000 |
Spray disc diameter | 50 | 120 | 120 | 150 | 180-240 |
热 源 | 电 | Steam + electricity | Steam + electricity, oil, gas, hot blast stove | ||
Electric heating power | 9 | 36 | 72 | 99 | |
Overall dimensions (m) (long x 宽 x high) | 1.8 x 0.93 x 2.2 | 4 x 2.7 x 4.5 | 4.5 x 3.5 x 5.5 | 7 x 5.5 x 7.2 | Determine according to actual situation |
Dry powder recycling | ≥95 | ||||
Note: The amount of water evaporation is related to the characteristics of the material and the hot air inlet and outlet temperatures.When the outlet temperature is 90°C, the water evaporation curve is shown in the figure above (for model selection reference). As the product is constantly updated, the relevant parameters will change without prior notice.
The main purpose
This machine is a special drying equipment suitable for drying emulsions, suspensions, pastes, solutions and other liquids.In polymers and resins; dyeing
Materials and pigments; ceramics and glass; rust removers and insecticides; carbohydrates and dairy products; detergents and surface active products; fertilizers; drying of organic compounds and inorganic compound liquid materials. outstanding.
Detail image
Features
1. The drying speed is fast, usually only 5-15 seconds, and has the characteristics of instant drying.
2. The whole drying process of materials can be completed in a short time. It is suitable for drying heat-sensitive materials and can maintain the color, aroma and taste of materials.
3. The production process is simplified, operation and control are convenient, and it is suitable for continuous control of production.
4. The product has good dispersion, fluidity and solubility.
working principle
The air passes through the filter and heater and enters the air distributor at the top of the dryer. The hot air enters the dryer evenly in a spiral shape.The material liquid is pumped from the material liquid tank through the filter to the centrifugal atomizer at the top of the dryer, so that the material liquid is sprayed into very small mist-like droplets. The material liquid and the hot air flow together and contact the water to evaporate quickly, and in a very short time The finished product is dried within a certain period of time.The finished product is discharged from the bottom of the drying tower and the cyclone separator, and the waste gas is extracted by the fan and discharged.
Working principle diagram
Process flow diagram
water evaporation curve
Technical Parameters
型 号 | Type 5 | Type 25 | Model 50 | Model 150 | Model 200-2000 |
inlet temperature | 140-350 automatic control | ||||
output temperature | 80-90 | ||||
water evaporation | 5 | 25 | 50 | 150 | 200-2000 |
Centrifugal spray head transmission form | Compressed air transmission | Mechanical transmission | |||
Rotating speed | 25000 | 18000 | 18000 | 16000 | 8000-15000 |
Spray disc diameter | 50 | 120 | 120 | 150 | 180-240 |
热 源 | 电 | Steam + electricity | Steam + electricity, oil, gas, hot blast stove | ||
Electric heating power | 9 | 36 | 72 | 99 | |
Overall dimensions (m) (long x 宽 x high) | 1.8 x 0.93 x 2.2 | 4 x 2.7 x 4.5 | 4.5 x 3.5 x 5.5 | 7 x 5.5 x 7.2 | Determine according to actual situation |
Dry powder recycling | ≥95 | ||||
Note: The amount of water evaporation is related to the characteristics of the material and the hot air inlet and outlet temperatures.When the outlet temperature is 90°C, the water evaporation curve is shown in the figure above (for model selection reference). As the product is constantly updated, the relevant parameters will change without prior notice.
